Chain Sling Builder
[woof autoload=0]

Chain Slings

REFINE YOUR RESULTS

Chain Sling Builder

Choose your options below, then press Build My Sling.

Technical Specifications & Rigging Reference

Grade 100 Alloy Chain Slings — Engineering Reference & Buyer’s Guide

Slings Unlimited fabricates custom and standard Grade 100 alloy steel overhead lifting chain slings in Augusta, Georgia using domestic alloy chain and precision-forged Grade 100 fittings. Every chain sling assembly meets or exceeds ASME B30.9 and OSHA 1910.184 overhead lifting standards with a 4:1 design factor and a securely attached 1/4″ thick aluminum ID tag.

1-Leg to 4-Leg & Adjustable Configurations

Choose single-leg chain slings for vertical and choker picks, or 2-leg, 3-leg, and 4-leg chain bridles for balanced multi-point lifts. Optional upper grab-hook adjusters let riggers shorten individual chain legs in the field to level uneven centers of gravity.

4 Hook Options Built to Order

Available with Grade 100 Sling Hooks (SOS with heavy-duty safety latch), Clevis Grab Hooks (SOG for non-sliding chain engagement), Wide-Throat Foundry Hooks (SOF), and Positive-Locking Self-Locking Hooks (SOSL that lock automatically under load).

High-Temperature & Harsh-Duty Performance

Unlike synthetic slings that must be retired above 194°F, Grade 100 alloy chain slings maintain 100% of their Working Load Limit from -40°F up to 400°F and resist abrasion, steel-plate burrs, UV exposure, and machine oils.

Grade 100 Alloy Chain Sling Working Load Limits (WLL in Lbs — ASME B30.9)
Chain Size Single Leg (90°) 2-Leg Bridle (60°) 2-Leg Bridle (45°) 3 & 4-Leg Bridle (60°) 3 & 4-Leg Bridle (45°)
9/32" (7 mm) 4,300 lbs 7,400 lbs 6,100 lbs 11,200 lbs 9,100 lbs
3/8" (10 mm) 8,800 lbs 15,200 lbs 12,400 lbs 22,900 lbs 18,700 lbs
1/2" (13 mm) 15,000 lbs 26,000 lbs 21,200 lbs 39,000 lbs 31,800 lbs
5/8" (16 mm) 22,600 lbs 39,100 lbs 32,000 lbs 58,700 lbs 47,900 lbs
3/4" (20 mm) 35,300 lbs 61,100 lbs 49,900 lbs 91,700 lbs 74,900 lbs
7/8" (22 mm) 42,700 lbs 74,000 lbs 60,400 lbs 110,900 lbs 90,600 lbs
1" (26 mm) 59,700 lbs 103,400 lbs 84,400 lbs 155,100 lbs 126,600 lbs

Capacity Charts, Inspection Guides & Related Rigging Categories

Frequently Asked Questions

How is the length (reach) of a Grade 100 chain sling measured?
Per ASME B30.9, chain sling reach is measured from the inside load-bearing point of the upper master link to the inside load-bearing bowl (saddle) of the lower hook when pulled taut. Every Slings Unlimited product diagram illustrates the exact bearing-point-to-bearing-point reach.
What is the advantage of Grade 100 chain over Grade 80 chain slings?
Grade 100 alloy chain provides roughly 25% higher Working Load Limit (WLL) than the same diameter of Grade 80 chain. That allows riggers to lift heavier loads with the same chain size or step down one chain diameter to reduce sling weight.
Why do 3-leg and 4-leg chain bridles share the same Working Load Limit?
Under ASME B30.9 and OSHA 1910.184, a 4-leg bridle on a rigid load is rated assuming three legs carry the load while the fourth leg stabilizes the balance, unless an engineer verifies equal load sharing across all four legs.
When should I choose a Self-Locking Hook (SOSL) vs. a Sling Hook with Latch (SOS)?
Sling Hooks (SOS) feature a spring-loaded latch for fast hooking and unhooking on general picks. Self-Locking Hooks (SOSL) automatically close and lock as soon as tension is applied and cannot open until the load is set down and the release trigger is depressed.
What happens to chain sling capacity in a choker hitch?
When a chain sling is rigged in a choker hitch using a hook or clevis grab hook, the rated capacity is reduced to approximately 80% of the single-leg vertical Working Load Limit.

Chain Slings

Chain slings are the most durable slings available. Chain slings come in several grades; we build ours with Grade 100 alloy chain only.

We invite you to use our Chain Sling Builder to build the perfect sling for your application. Start by picking the chain size and then select the number of legs. You can even decide if the sling will be adjustable. After you’ve “built it”, we will fabricate it to your specifications. All of our slings, including these, are made in the USA. We use American-made Grade 100 alloy chain and globally sourced fittings.

If you can’t find the chain sling you need, visit our Contact Us page or send us an email and tell us what you need. We are more than happy to fix you right up with a competitive quote!

Scroll to Top