Shackle Capacity Chart: Working Load Limit by Size
Find the working load limit (WLL) of every anchor shackle we sell, from 3/16″ to 2-1/2″, in one chart. We carry CM Super Strong, Crosby (G-209 & G-2130), and Green Pin® (Van Beest) hot-dip galvanized anchor shackles in screw pin and bolt type styles. Pick your size below to see the capacity for each brand and shop that exact shackle.
Safety first: Never exceed the working load limit (WLL). Capacities shown are the manufacturer ratings listed on our product pages; the WLL marked on the shackle body governs. Capacities vary by brand, so do not swap brands assuming the same rating. Inspect shackles and pins before each use and remove damaged or worn shackles from service.
Swipe the table sideways to see every column.
| Shackle Size |
CM Super Strong | Crosby (G-209 & G-2130) | Green Pin® (Van Beest) | |||
|---|---|---|---|---|---|---|
| WLL (US tons) | WLL (Tons) | WLL (metric t) | ||||
| 3/16″ Shackle | — | — | 0.33 t (660 lbs) | Screw Pin Bolt Type | — | — |
| 1/4″ Shackle | 0.75 ton (1,500 lbs) | Screw Pin Bolt Type | 0.5 t (1,000 lbs) | Screw Pin Bolt Type | 0.5 t (1,100 lbs) | Screw Pin Bolt Type |
| 5/16″ Shackle | — | — | 0.75 t (1,500 lbs) | Screw Pin Bolt Type | — | — |
| 3/8″ Shackle | 1.5 tons (3,000 lbs) | Screw Pin Bolt Type | 1 t (2,000 lbs) | Screw Pin Bolt Type | 1 t (2,200 lbs) | Screw Pin Bolt Type |
| 7/16″ Shackle | — | — | 1.5 t (3,000 lbs) | Screw Pin Bolt Type | — | — |
| 1/2″ Shackle | 3 tons (6,000 lbs) | Screw Pin Bolt Type | 2 t (4,000 lbs) | Screw Pin Bolt Type | 2 t (4,410 lbs) | Screw Pin Bolt Type |
| 5/8″ Shackle | 4.5 tons (9,000 lbs) | Screw Pin Bolt Type | 3.25 t (6,500 lbs) | Screw Pin Bolt Type | 3.25 t (7,170 lbs) | Screw Pin Bolt Type |
| 3/4″ Shackle | 6.5 tons (13,000 lbs) | Screw Pin Bolt Type | 4.75 t (9,500 lbs) | Screw Pin Bolt Type | 4.75 t (10,470 lbs) | Screw Pin Bolt Type |
| 7/8″ Shackle | 8.5 tons (17,000 lbs) | Screw Pin Bolt Type | 6.5 t (13,000 lbs) | Screw Pin Bolt Type | 6.5 t (14,330 lbs) | Screw Pin Bolt Type |
| 1″ Shackle | 10 tons (20,000 lbs) | Screw Pin Bolt Type | 8.5 t (17,000 lbs) | Screw Pin Bolt Type | 8.5 t (18,740 lbs) | Screw Pin Bolt Type |
| 1-1/8″ Shackle | 12 tons (24,000 lbs) | Screw Pin Bolt Type | 9.5 t (19,000 lbs) | Screw Pin Bolt Type | 9.5 t (20,940 lbs) | Screw Pin Bolt Type |
| 1-1/4″ Shackle | 14 tons (28,000 lbs) | Screw Pin Bolt Type | 12 t (24,000 lbs) | Screw Pin Bolt Type | 12 t (26,460 lbs) | Screw Pin Bolt Type |
| 1-3/8″ Shackle | — | — | 13.5 t (27,000 lbs) | Screw Pin Bolt Type | — | — |
| 1-1/2″ Shackle | 20 tons (40,000 lbs) | Screw Pin Bolt Type | 17 t (34,000 lbs) | Screw Pin Bolt Type | 17 t (37,480 lbs) | Screw Pin Bolt Type |
| 1-3/4″ Shackle | 30 tons (60,000 lbs) | Screw Pin Bolt Type | 25 t (50,000 lbs) | Screw Pin Bolt Type | 25 t (55,120 lbs) | Screw Pin Bolt Type |
| 2″ Shackle | 35 tons (70,000 lbs) | Screw Pin Bolt Type | 35 t (70,000 lbs) | Screw Pin Bolt Type | 35 t (77,160 lbs) | Screw Pin Bolt Type |
| 2-1/2″ Shackle | — | — | 55 t (110,000 lbs) | Screw Pin Bolt Type | — | — |
Browse all shackles (CM Super Strong, Crosby G-209 & G-2130, and Van Beest Green Pin) or filter by brand, type, size, and capacity on our Shackles category page.
Anchor Shackle Dimensions
Dimensions, stock numbers, and weights as listed on our product pages for CM Super Strong, Crosby (G-209 & G-2130), and Green Pin® (Van Beest).
CM Super Strong Anchor Shackles
| Size | Pin Dia. |
Inside Width |
Inside Length |
Mouth Width |
Weight Screw Pin |
Weight Bolt Type |
|---|---|---|---|---|---|---|
| 1/4″ | 0.31″ | 0.75″ | 1.13″ | 0.47″ | 0.12 | 0.12 |
| 3/8″ | 0.44″ | 1.0″ | 1.4″ | 0.66″ | 0.3 | 0.30 |
| 1/2″ | 0.63″ | 1.38″ | 1.94″ | 0.84″ | 0.75 | 0.75 |
| 5/8″ | 0.75″ | 1.63″ | 2.41″ | 1.06″ | 1.3 | 1.3 |
| 3/4″ | 0.88″ | 1.89″ | 2.84″ | 1.28″ | 2.3 | 2.3 |
| 7/8″ | 1.00″ | 2.06″ | 3.31″ | 1.44″ | 3.5 | 3.5 |
| 1″ | 1.13″ | 2.52″ | 3.75″ | 1.72″ | 5 | 5 |
| 1-1/8″ | 1.25″ | 2.69″ | 4.02″ | 1.84″ | 7 | 7 |
| 1-1/4″ | 1.38″ | 2.88″ | 4.63″ | 2.03″ | 9.5 | 9.5 |
| 1-1/2″ | 1.63″ | 3.50″ | 5.63″ | 2.41″ | 17.2 | 17.2 |
| 1-3/4″ | 2.00″ | 4.75″ | 6.97″ | 2.94″ | 27.7 | 27.7 |
| 2″ | 2.25″ | 5.5″ | 7.44″ | 3.28″ | 39 | 39 |
Crosby Forged Carbon Anchor Shackles (G-209 Screw Pin & G-2130 Bolt Type)
| Size | G-209 Stock # |
G-2130 Stock # |
Pin Dia. |
Inside Width |
Inside Length |
Mouth Width |
Weight G-209 |
Weight G-2130 |
|---|---|---|---|---|---|---|---|---|
| 3/16″ | 1018357 | 1019464 | 0.25″ | 0.60″ | 0.88″ | 0.38″ | 0.06 | 0.06 |
| 1/4″ | 1018375 | 1019466 | 0.31″ | 0.78″ | 1.13″ | 0.47″ | 0.10 | 0.11 |
| 5/16″ | 1018393 | 1019468 | 0.38″ | 0.84″ | 1.22″ | 0.53″ | 0.18 | 0.22 |
| 3/8″ | 1018419 | 1019470 | 0.44″ | 1.03″ | 1.44″ | 0.66″ | 0.31 | 0.33 |
| 7/16″ | 1018437 | 1019471 | 0.50″ | 1.16″ | 1.69″ | 0.75″ | 0.38 | 0.49 |
| 1/2″ | 1018455 | 1019472 | 0.63″ | 1.31″ | 1.88″ | 0.81″ | 0.72 | 0.79 |
| 5/8″ | 1018473 | 1019490 | 0.75″ | 1.69″ | 2.38″ | 1.06″ | 1.37 | 1.68 |
| 3/4″ | 1018491 | 1019515 | 0.88″ | 2.00″ | 2.81″ | 1.25″ | 2.35 | 2.72 |
| 7/8″ | 1018516 | 1019533 | 1.00″ | 2.28″ | 3.31″ | 1.44″ | 3.62 | 3.95 |
| 1″ | 1018534 | 1019551 | 1.13″ | 2.69″ | 3.75″ | 1.69″ | 5.03 | 5.66 |
| 1-1/8″ | 1018552 | 1019579 | 1.25″ | 2.91″ | 4.25″ | 1.81″ | 7.41 | 8.27 |
| 1-1/4″ | 1018570 | 1019597 | 1.38″ | 3.25″ | 4.69″ | 2.03″ | 9.50 | 11.71 |
| 1-3/8″ | 1018598 | 1019613 | 1.50″ | 3.63″ | 5.25″ | 2.25″ | 13.53 | 15.83 |
| 1-1/2″ | 1018614 | 1019631 | 1.63″ | 3.88″ | 5.75″ | 2.38″ | 17.20 | 19.00 |
| 1-3/4″ | 1018632 | 1019659 | 2.00″ | 5.00″ | 7.00″ | 2.88″ | 27.78 | 33.91 |
| 2″ | 1018650 | 1019677 | 2.25″ | 5.75″ | 7.75″ | 3.25″ | 45.00 | 52.25 |
| 2-1/2″ | 1018678 | 1019695 | 2.75″ | 7.25″ | 10.50″ | 4.13″ | 85.75 | 98.25 |
Green Pin® (Van Beest) Anchor Shackles
| Size | Pin Dia. |
Inside Width |
Inside Length |
Mouth Width |
Weight Screw Pin |
Weight Bolt Type |
|---|---|---|---|---|---|---|
| 1/4″ | 5/16″ | 0.78″ | 1.16″ | 0.47″ | 0.11 | 0.11 |
| 3/8″ | 7/16″ | 1.03″ | 1.44″ | 0.66″ | 0.3 | 0.34 |
| 1/2″ | 5/8″ | 1.25″ | 2″ | 0.88″ | 0.79 | 0.92 |
| 5/8″ | 3/4″ | 1.69″ | 2.53″ | 1.06″ | 1.38 | 1.62 |
| 3/4″ | 7/8″ | 2″ | 3″ | 1.22″ | 2.22 | 2.59 |
| 7/8″ | 1″ | 2.28″ | 3.28″ | 1.41″ | 3.31 | 3.9 |
| 1″ | 1-1/8″ | 2.69″ | 3.75″ | 1.69″ | 4.86 | 5.69 |
| 1-1/8″ | 1-1/4″ | 2.94″ | 4.25″ | 1.84″ | 6.97 | 8.06 |
| 1-1/4″ | 1-3/8″ | 3.28″ | 4.53″ | 2″ | 9.49 | 10.81 |
| 1-1/2″ | 1-5/8″ | 3.91″ | 5.75″ | 2.38″ | 16.37 | 18.06 |
| 1-3/4″ | 2″ | 4.97″ | 7″ | 2.91″ | 28.31 | 31.34 |
| 2″ | 2-1/4″ | 5.44″ | 7.75″ | 3.28″ | 40.01 | 43.77 |
Frequently Asked Questions
What is the capacity of a 3/16 inch shackle?
A 3/16″ Crosby G-209 (screw pin) or G-2130 (bolt type) anchor shackle is rated 0.33 t (660 lbs) for Crosby G-209 / G-2130 at a 6:1 design factor. Always use the WLL marked on the shackle body.
What is the capacity of a 1/4 inch shackle?
It depends on the brand. A 1/4″ anchor shackle is rated 0.75 ton (1,500 lbs) for CM Super Strong, 0.5 t (1,000 lbs) for Crosby G-209 / G-2130, and 0.5 t (1,100 lbs) for Green Pin (Van Beest) (screw pin or bolt type). Always use the WLL marked on the shackle you are rigging.
What is the capacity of a 5/16 inch shackle?
A 5/16″ Crosby G-209 (screw pin) or G-2130 (bolt type) anchor shackle is rated 0.75 t (1,500 lbs) for Crosby G-209 / G-2130 at a 6:1 design factor. Always use the WLL marked on the shackle body.
What is the capacity of a 3/8 inch shackle?
It depends on the brand. A 3/8″ anchor shackle is rated 1.5 tons (3,000 lbs) for CM Super Strong, 1 t (2,000 lbs) for Crosby G-209 / G-2130, and 1 t (2,200 lbs) for Green Pin (Van Beest) (screw pin or bolt type). Always use the WLL marked on the shackle you are rigging.
What is the capacity of a 7/16 inch shackle?
A 7/16″ Crosby G-209 (screw pin) or G-2130 (bolt type) anchor shackle is rated 1.5 t (3,000 lbs) for Crosby G-209 / G-2130 at a 6:1 design factor. Always use the WLL marked on the shackle body.
What is the capacity of a 1/2 inch shackle?
It depends on the brand. A 1/2″ anchor shackle is rated 3 tons (6,000 lbs) for CM Super Strong, 2 t (4,000 lbs) for Crosby G-209 / G-2130, and 2 t (4,410 lbs) for Green Pin (Van Beest) (screw pin or bolt type). Always use the WLL marked on the shackle you are rigging.
What is the capacity of a 5/8 inch shackle?
It depends on the brand. A 5/8″ anchor shackle is rated 4.5 tons (9,000 lbs) for CM Super Strong, 3.25 t (6,500 lbs) for Crosby G-209 / G-2130, and 3.25 t (7,170 lbs) for Green Pin (Van Beest) (screw pin or bolt type). Always use the WLL marked on the shackle you are rigging.
What is the capacity of a 3/4 inch shackle?
It depends on the brand. A 3/4″ anchor shackle is rated 6.5 tons (13,000 lbs) for CM Super Strong, 4.75 t (9,500 lbs) for Crosby G-209 / G-2130, and 4.75 t (10,470 lbs) for Green Pin (Van Beest) (screw pin or bolt type). Always use the WLL marked on the shackle you are rigging.
What is the capacity of a 7/8 inch shackle?
It depends on the brand. A 7/8″ anchor shackle is rated 8.5 tons (17,000 lbs) for CM Super Strong, 6.5 t (13,000 lbs) for Crosby G-209 / G-2130, and 6.5 t (14,330 lbs) for Green Pin (Van Beest) (screw pin or bolt type). Always use the WLL marked on the shackle you are rigging.
What is the capacity of a 1 inch shackle?
It depends on the brand. A 1″ anchor shackle is rated 10 tons (20,000 lbs) for CM Super Strong, 8.5 t (17,000 lbs) for Crosby G-209 / G-2130, and 8.5 t (18,740 lbs) for Green Pin (Van Beest) (screw pin or bolt type). Always use the WLL marked on the shackle you are rigging.
What is the capacity of a 1-1/8 inch shackle?
It depends on the brand. A 1-1/8″ anchor shackle is rated 12 tons (24,000 lbs) for CM Super Strong, 9.5 t (19,000 lbs) for Crosby G-209 / G-2130, and 9.5 t (20,940 lbs) for Green Pin (Van Beest) (screw pin or bolt type). Always use the WLL marked on the shackle you are rigging.
What is the capacity of a 1-1/4 inch shackle?
It depends on the brand. A 1-1/4″ anchor shackle is rated 14 tons (28,000 lbs) for CM Super Strong, 12 t (24,000 lbs) for Crosby G-209 / G-2130, and 12 t (26,460 lbs) for Green Pin (Van Beest) (screw pin or bolt type). Always use the WLL marked on the shackle you are rigging.
What is the capacity of a 1-3/8 inch shackle?
A 1-3/8″ Crosby G-209 (screw pin) or G-2130 (bolt type) anchor shackle is rated 13.5 t (27,000 lbs) for Crosby G-209 / G-2130 at a 6:1 design factor. Always use the WLL marked on the shackle body.
What is the capacity of a 1-1/2 inch shackle?
It depends on the brand. A 1-1/2″ anchor shackle is rated 20 tons (40,000 lbs) for CM Super Strong, 17 t (34,000 lbs) for Crosby G-209 / G-2130, and 17 t (37,480 lbs) for Green Pin (Van Beest) (screw pin or bolt type). Always use the WLL marked on the shackle you are rigging.
What is the capacity of a 1-3/4 inch shackle?
It depends on the brand. A 1-3/4″ anchor shackle is rated 30 tons (60,000 lbs) for CM Super Strong, 25 t (50,000 lbs) for Crosby G-209 / G-2130, and 25 t (55,120 lbs) for Green Pin (Van Beest) (screw pin or bolt type). Always use the WLL marked on the shackle you are rigging.
What is the capacity of a 2 inch shackle?
It depends on the brand. A 2″ anchor shackle is rated 35 tons (70,000 lbs) for CM Super Strong, 35 t (70,000 lbs) for Crosby G-209 / G-2130, and 35 t (77,160 lbs) for Green Pin (Van Beest) (screw pin or bolt type). Always use the WLL marked on the shackle you are rigging.
What is the capacity of a 2-1/2 inch shackle?
A 2-1/2″ Crosby G-209 (screw pin) or G-2130 (bolt type) anchor shackle is rated 55 t (110,000 lbs) for Crosby G-209 / G-2130 at a 6:1 design factor. Always use the WLL marked on the shackle body.
What is the difference between a screw pin and a bolt type anchor shackle?
A screw pin anchor shackle (such as Crosby G-209, CM M646G, or Green Pin G-4161) has a threaded pin that screws into the bow, so it is quick to install and remove. A bolt type anchor shackle (such as Crosby G-2130, CM M846G, or Green Pin G-4163) uses a bolt, nut and cotter pin; it is intended for long-term or permanent installation, and the bolt style keeps sliding loads from turning the pin and backing it out. For all three brands we carry, screw pin and bolt type shackles of the same size and brand have the same WLL.
Why do shackles of the same size have different capacities across brands?
Each manufacturer sets its own engineering ratings. CM Super Strong shackles are rated higher than standard carbon shackles of the same nominal bow diameter (for example 6.5 tons / 13,000 lbs for CM Super Strong vs 4.75 t / 9,500 lbs for Crosby G-209/G-2130 and 4.75 t / 10,470 lbs for Green Pin at 3/4″). Always verify the manufacturer and the WLL forged on the shackle body before lifting.
What does "t" mean on a Crosby or Green Pin shackle?
Crosby G-209/G-2130 shackles list Working Load Limit in tons (t) converted on our product pages at 1 ton = 2,000 lbs (0.33 t = 660 lbs up to 55 t = 110,000 lbs). Green Pin (Van Beest) shackles are rated in metric tonnes (1 t = 1,000 kg ≈ 2,205 lbs). CM Super Strong shackles are rated in US short tons (1 ton = 2,000 lbs). Our table shows both the ton rating and the pound equivalent for every size.
What does WLL mean on a shackle?
WLL is the working load limit: the maximum load the shackle is rated to carry in service, as set by the manufacturer. Never exceed it.