1-1/4″ Bolt Type Anchor Shackle – Crosby G-2130 – 12 Ton Capacity

1-1/4″ Crosby G-2130 Hot-Dip Galvanized Bolt Type Anchor Shackle (#1019597) – 12 Ton (24,000 lb) WLL

The genuine Crosby G-2130 1-1/4″ Bolt Type Anchor Shackle (Stock #1019597) is engineered for permanent, long-term, or high-vibration overhead lifting and rigging installations where a load may slide on the shackle pin and cause a standard screw pin to rotate. Featuring a forged, quenched, and tempered carbon steel bow paired with an alloy steel Red Pin® thin hex head bolt, hex nut, and secondary cotter pin retention, the G-2130 delivers a certified 12 Ton (24,000 lb) Working Load Limit with a 6:1 design factor. Every shackle bow incorporates Crosby’s forged QUIC-CHECK® 45° angle indicators and throat deformation markers for fast visual inspection in the field.

Specifications & Crosby Engineering Dimensions

• Working Load Limit: 12 ton (24,000 lbs)
• Product Weight: 11.71 lbs
• Manufacturer Name: Crosby
• Crosby Model & Stock Number: G-2130 (#1019597)
• Slings Unlimited SKU: 103-4114
• Shackle Size: 1-1/4″
• Pin Size: 1-3/8″ (1.40″)
• Mouth Width: 2.03″ (±0.06″)
• Inside Height: 4.69″ (±0.25″)
• Inside Width: 3.25″
• Bow Body Diameter (Dimension D): 1.29″
• Eye Outer Diameter (Dimension F): 3.00″
• Overall Body Height (Dimension H): 8.25″
• Outer Width Across Bow (Dimension L): 5.75″
• Overall Width Across Bolt & Nut (Dimension M): 6.69″
• Crown Top Thickness (Dimension N): 1.38″
• Design Factor: 6:1 Safety Factor (Fatigue Rated to 20,000 Cycles at 1.5x WLL)
• Operating Temperature Range: -40°F (-40°C) to 400°F (204°C)
• Material & Construction: Closed-Die Forged Quenched & Tempered Grade 6 Carbon Steel Bow with Alloy Steel Red Pin®
• Field Inspection Markings: Forged Crosby QUIC-CHECK® (45° Hitch Angle & Throat Opening Indicators) & PIC Traceability Code
• Standards Compliance: Meets or Exceeds ASME B30.26, Federal Specification RR-C-271H, and EN 13889
• Returns: This item cannot be returned due to safety risks.
• Hot-Dip Galvanized

Inspection & Safety

Field Application & Securement Guidelines: Bolt-type (safety) anchor shackles (G-2130) use a positive three-piece pin assembly—alloy thin hex head bolt (1-3/8″ (1.40″) diameter), threaded hex nut, and split cotter pin—to prevent the pin from backing out under dynamic vibration, rotation, or sliding line contact. Its generous 3.25″ inside bow width (Dimension E) and 4.69″ inside length (Dimension C) accept multi-leg chain slings, wire rope slings, and synthetic round slings, as well as side-loaded connections (rated 100% WLL in-line at 0°–5°, 70% WLL from 6° to 45°, and 50% WLL from 46° to 90°). Never operate a G-2130 shackle without both the hex nut fully seated and the cotter pin properly spread.

Need certification packages, companion CM or Van Beest Green Pin shackles, or custom rigging hardware? Contact Us or call our rigging specialists at (706) 750-9099.

Safety

Misuse of the rigging and safety gear can result in serious injury including loss of life. At no time should rigging or safety gear be used beyond its certified load ratings (aka Working Load Limits). Normal wear and tear should be expected with use of rigging and safety gear. Therefore, all gear should be thoroughly inspected before each and every use. Worn or unsafe rigging and safety gear should never be used. Slings Unlimited disclaims liability for any misuse or incorrect product selection by our customers.