CM Alloy Swivel Hook with Latch 5 metric tons (M3507A) – 11,023 lb WLL

POSITIONING ONLY — use this hook to position the load before lifting. This is not a bearing swivel hook. Do not swivel or rotate this hook under load.

The CM Alloy Swivel Hook with Latch 5 metric tons (M3507A) is a heat-treated, quenched and tempered alloy steel swivel rigging hook with a safety latch. It is rated for a 11,023 lb (5 metric tons) Working Load Limit at a 5:1 design factor and meets ASME B30.10. Use it only to position the hook before the load is lifted. It is not a bearing swivel hook and must not be swivelled or rotated under load. Powder-coated orange.

Specifications

• Manufacturer: Columbus McKinnon (CM)
• CM Part No. (MPN): M3507A
• Model: Swivel Rigging Hook (CM alloy swivel hook with safety latch)
• Material: Alloy steel, heat-treated, quenched and tempered; powder-coated orange
• Standard: ASME B30.10
• Working Load Limit (WLL): 11,023 lbs (5 metric tons)
• Design factor: 5:1
• Weight (each): 5.36 lbs
• Latch: Safety latch included. Replacement latch kit 4X1307

Dimensions (per Columbus McKinnon Rigging Catalog RG4286, p.100)

• Dimension A (eye outside width): 3.50″
• Dimension B (eye inside height): 1.77″
• Dimension C (eye inside width): 2.00″
• Dimension D (overall width): 5.11″
• Dimension G (base height): 1.44″
• Dimension H (bow width): 1.63″
• Dimension I (saddle): 1.31″
• Dimension L (overall length): 9.76″
• Dimension R (reach): 7.53″
• Dimension S (eye thickness): 0.75″
• Dimension T (tip): 1.53″
• Dimension O (throat opening): 1.41″

Features

• POSITIONING ONLY: use this hook to position the load before it is lifted. This is not a bearing swivel hook. Do not swivel or rotate it under load. For rotation under load, use a bearing swivel hook
• Alloy steel, heat-treated, quenched and tempered, powder-coated orange
• Safety latch included. The latch is a safety device only and must not carry load
• Never side-, tip- or back-load the hook; lift in line with the hook only
• Inspect the hook and latch before each use and remove a bent, worn or damaged hook from service

Note: Columbus McKinnon Working Load Limits are in metric tons: 1 t = 1,000 kg ≈ 2,204.6 lb. Never exceed the rated WLL. This hook is for positioning only: do not swivel or rotate it while it supports a load. Inspect and use the hook per the manufacturer’s instructions.

Need help choosing a hook? Visit our Contact Us page or call 706-750-9099.