POSITIONING ONLY — swivel to position the hook before lifting. Do not swivel or rotate this hook under load. This swivel has no thrust bearing; for rotation under load, use a bearing swivel hook.
The Van Beest Green Pin P-6703A 22 metric tons Alloy Positioning Swivel Hook (Article HKK03A220) is a Grade 8 (80) alloy steel swivel eye hook with a safety latch. It is rated for a 48,502 lb (22 metric tons) Working Load Limit at a 4:1 design factor (MBL = 4 × WLL). Van Beest does not list a thrust bearing for this swivel eye, so use it only to position the hook before the load is lifted. It must not be swivelled or rotated under load. For use in a wire rope sling, Van Beest requires a 5:1 safety factor.
Specifications
- Manufacturer: Van Beest (Green Pin®)
- Van Beest Article No. (MPN): HKK03A220
- Model: P-6703A (Green Pin® Hook SE GR8, alloy swivel eye hook with safety latch)
- Material: Alloy steel, Grade 8 (80), quenched and tempered; painted red
- Working Load Limit (WLL): 48,502 lbs (22 metric tons)
- Design factor: 4:1 (MBL = 4 × WLL); 5:1 is required when the hook is used in a wire rope sling
- Temperature range: -4 °F to +392 °F (-20 °C to +200 °C)
- Certification: 2.1, 2.2, 3.1, CE IIA (as listed by Van Beest)
- Weight (each): 57.32 lbs (26 kg)
- Latch: Safety latch included
Dimensions (per the Van Beest Green Pin article table; inches per the Green Pin Imperial Catalogue 2024, p.137)
- Dimension A (length): 17.06″ (433 mm)
- Dimension B (length inside): 4.19″ (106 mm)
- Dimension C (width inside): 4.53″ (115 mm)
- Dimension D (opening, hook): 3.44″ (87 mm)
- Dimension E (opening, hook): 3.06″ (78 mm)
- Dimension F (diameter): 1.16″ (29 mm)
- Dimension G (width): 3.16″ (80 mm)
- Dimension H (width): 7.53″ (191 mm)
- Dimension I (width): 4.25″ (108 mm)
- Dimension J (thickness): 2.56″ (65 mm)
- Dimension K (width outside): 11.16″ (published in inches only)
- Dimension L (length outside): 21.72″ (published in inches only)
Features
- POSITIONING ONLY: swivel the hook to position it before the load is lifted. Do not swivel or rotate it under load. Van Beest says swivels without bearings are intended as positioning devices only; for rotation under load, use a thrust-bearing swivel hook
- Grade 8 (80) alloy steel, quenched and tempered, painted red
- Safety latch included. The latch is a safety device only and must not carry load
- Never side-, tip- or back-load the hook; lift in line with the hook only
- Inspect the hook and latch before each use and remove a bent, worn or damaged hook from service
Note: Van Beest Working Load Limits are in metric tons: 1 t = 1,000 kg = 2,204.6 lb. Never exceed the rated WLL. This hook is for positioning only: do not swivel or rotate it while it supports a load. Inspect and use the hook per the manufacturer’s instructions.
Need help choosing a hook? Visit our Contact Us page or call 706-750-9099.



Reviews
There are no reviews yet.