Crosby
Showing 1–24 of 34 results
- View Item
- View Item
- View Item
- View Item
- View Item
- View Item
- View Item
- View Item
- View Item
- View Item
- View Item
- View Item
- View Item
- View Item
- View Item
- View Item
- View Item
- View Item
- View Item
- View Item
- View Item
- View Item
- View Item
- View Item
Crosby Forged Anchor Shackles (G-209 & G-2130) — Specifications & WLL Guide
The Crosby Group’s forged alloy-pin anchor shackles (G-209 Screw Pin and G-2130 Bolt-Type with nut and cotter) are the global benchmark for overhead crane rigging, quenched and tempered with hot-dip galvanized bows, signature red pins, and patented Quic-Check angle indicators.
G-209 Screw Pin Anchor Shackles
Fast threading alloy screw pin for temporary rigging, choke hitches, and frequent sling changes from 3/16" (1/3 Ton) through 2" (35 Tons WLL).
G-2130 Bolt-Type Safety Anchor Shackles
Secured with an alloy bolt, hex nut, and split cotter pin to prevent pin rotation under vibration, permanent overhead installations, or load sliding.
Quic-Check Angle Marks & PIC Traceability
Forged with 45° Quic-Check angle indicators on the bow and Product Identification Codes (PIC) for full material and heat-treatment traceability.
| Nominal Shackle Size | Working Load Limit (Metric Tons) | WLL in Pounds | Pin Diameter | Inside Jaw Width | Crosby Model Series |
|---|---|---|---|---|---|
| 1/4" – 3/8" | 0.50 – 1.00 Ton | 1,000 – 2,000 lbs | 5/16" – 7/16" | 0.47" – 0.66" | G-209 / G-2130 |
| 1/2" | 2.00 Tons | 4,000 lbs | 5/8" | 0.81" | G-209 / G-2130 |
| 5/8" | 3.25 Tons | 6,500 lbs | 3/4" | 1.06" | G-209 / G-2130 |
| 3/4" | 4.75 Tons | 9,500 lbs | 7/8" | 1.25" | G-209 / G-2130 |
| 7/8" – 1" | 6.50 – 8.50 Tons | 13,000 – 17,000 lbs | 1" – 1-1/8" | 1.44" – 1.69" | G-209 / G-2130 |
| 1-1/8" – 1-1/2" | 9.50 – 17.00 Tons | 19,000 – 34,000 lbs | 1-1/4" – 1-5/8" | 1.81" – 2.38" | G-209 / G-2130 |
| 1-3/4" – 2" | 25.00 – 35.00 Tons | 50,000 – 70,000 lbs | 2" – 2-1/4" | 2.88" – 3.25" | G-209 / G-2130 |
Capacity Charts, Inspection Guides & Related Rigging Categories
- Shop All Rigging Shackles (Crosby, CM & Green Pin) →
- Wire Rope Bridles & Chokers →
- Grade 100 Alloy Chain Slings →
- WSTDA Nylon & Polyester Slings →
Frequently Asked Questions
When should I choose a Crosby G-2130 Bolt-Type shackle over a G-209 Screw Pin shackle?
Choose a Crosby G-2130 bolt-type shackle (with bolt, nut, and cotter pin) for permanent or long-term installations, overhead suspension, or any pick where a sling or load could slide across the pin and unscrew a G-209 pin.
What are the raised marks on the bow of a Crosby shackle?
Those are Crosby’s patented Quic-Check indicators forged at 45° angles on the shackle bow, allowing riggers to visually verify whether a multi-leg hitch exceeds a 45° side angle without a protractor.
How does side-loading affect a Crosby G-209 or G-2130 anchor shackle?
Per Crosby and ASME B30.26 guidelines, reduce the shackle’s Working Load Limit to 100% for inline (0°–5°) loading, 70% of WLL from 6° to 45°, and 50% of WLL from 46° to 90°. Never load beyond 90°.
Should the sling eye or the hook go on the Crosby shackle pin?
When connecting a single sling to a pad eye or lifting lug, seat the shackle pin through the fixed pad eye so the sling eye rests in the rounded shackle bow. Never let a moving sling run across a screw pin.
Are Crosby G-209 and G-2130 shackles hot-dip galvanized?
Yes. Both the G-209 and G-2130 feature hot-dip galvanized forged steel bows paired with Crosby’s signature red powder-coated alloy pins for corrosion protection and instant visual pin inspection.